Cisco Cisco Packet Data Gateway (PDG)
AAA Changes in Release 16
AAA Enhancements for 16.2 ▀
Release Change Reference, StarOS Release 16 ▄
45
New Behavior: As part of this enhancement, containers are closed only after CCA-U is received successfully. That is,
Rf trigger will be sent only after receiving CCA-U message.
Rf trigger will be sent only after receiving CCA-U message.
CSCup77319 - PGW: missing Framed-IPv6-Prefix/Interface-Id in RADIUS-acct
custom15
Applicable Products: P-GW
Feature Changes
New custom15 RADIUS Dictionary Attributes
The RADIUS AVPs “Framed-IPv6-Prefix” and “Framed-Interface-Id” are supported in custom15 RADIUS dictionary.
CSCuo03247 - update-dictionary-avps: Event Triggers by default w/o PCRF
installation
Applicable Products: GGSN, HA, HSGW, IPSG, PDSN, P-GW, S-GW
Feature Changes
Support for Configurable Custom Reauth Event Triggers
The
custom-reauth-trigger
CLI command has been extended to support enabling or disabling the PCEF’s implicit
event triggers. This CLI overwrites the previously configured triggers with the new event triggers. For example, if you
have configured the following triggers – QoS change, UE IP address allocation, UE IP address release, preservation-
changed, reactivation-changed, then the APN-AMBR modification failure and Resource modification request triggers
should be configured. This operation will overwrite all previously configured triggers and will configure only new
APN-AMBR modification failure and Resource modification request triggers.
have configured the following triggers – QoS change, UE IP address allocation, UE IP address release, preservation-
changed, reactivation-changed, then the APN-AMBR modification failure and Resource modification request triggers
should be configured. This operation will overwrite all previously configured triggers and will configure only new
APN-AMBR modification failure and Resource modification request triggers.
IMS Authorization service will send the implicit event trigger in CCR-U only when the trigger is enabled.
Command Changes
custom-reauth-trigger
This command has been extended to support additional keywords to selectively enable/disable the PCEF’s implicit
event triggers.
event triggers.
configure
context context_name
ims-auth-service service_name
policy control