Cisco Cisco Aironet 350 Wireless LAN Client Adapter

Página de 20
 
3
Release Notes for Cisco Aironet 350 and CB20A Client Adapter Install Wizard 1.8 for Windows
OL-15650-01
  System Requirements
Note
All drivers and supporting software (Card and Socket Services) for the PC card slot or 
Cardbus slot must be loaded and configured.
A display with a minimum resolution of 800 x 600 pixels
35 MB of free hard disk space (minimum)
Note
The Install Wizard terminates if you attempt to install it on a computer that has less than
35 MB of hard disk space.
One of the following host supplicants if your wireless network uses host-based EAP authentication 
with WPA:
Funk Odyssey Client supplicant version 2.2 (for Windows 2000)
Windows XP Service Pack 1 and Microsoft supplicant Q815485 (for Windows XP)
Note
Meetinghouse AEGIS Client supplicant version 2.1 or later is also supported for use with 
Windows 2000 and XP; however, it was not tested with this client adapter software release.
The Microsoft 802.1X supplicant, if your wireless network uses EAP-TLS, PEAP, or EAP-SIM 
authentication
If your wireless network uses PEAP authentication with a One-Time Password (OTP) user database: 
SofToken version 1.3, 2.0, or later from Secure Computing; SecurID version 2.5 from RSA; or 
hardware token from OTP vendors
Your software token PIN or hardware token password
If your wireless network uses EAP-SIM authentication:
PCSC-compliant smartcard reader installed in your computer’s Type II or Type III PC card slot
Gemplus SIM+ smartcard inserted in the reader
The SIM card’s PIN
Note
The EAP-SIM supplicant included in the Install Wizard file supports only Gemplus SIM+ 
cards; however, an updated supplicant is available that supports standard GSM-SIM cards as 
well as more recent versions of the EAP-SIM protocol. The new supplicant is available for 
download from Cisco.com at the following URL:
The following information from your system administrator:
The logical name for your workstation (also referred to as client name)
The protocols necessary to bind to the client adapter
The case-sensitive service set identifier (SSID) for your RF network
If your computer is not connected to a DHCP server, the IP address, subnet mask, and default 
gateway address of your computer