Cisco Cisco Packet Data Gateway (PDG)

 

▄  SNMP MIB Reference, StarOS Release 16 

The following are the starOS traps.  

Information on standards-based traps can be found here: 

  

starCardTempOverheat

 

enterprise.8164.2.1 

 

The card has reached a temperature beyond its safe operating range.  

Probable Cause: External temperature is too high; one or more fan failures; blockages that prevent fan air 
inflow/outflow. 

Action to be Taken: Inspect chassis for any item that may be blocking chassis air flow. Verify adjacent equipment is 
not obstructing air flow. Verify that the fans are running via the CLI/Web Element Manager. Check air filters. Check 
the chassis maintenance schedule to see if chassis needs routine air filter replacement. Verify room temperature is 
within acceptable operating conditions.  

Clear Condition: This condition is cleared when the card reaches its operating temperature range or is removed from 
the system. 

Condition Clear Alarm: This condition is cleared by a starCardTempOK notification. 

 

starSlotNum 

starCardTemperature 

starCardTempOK

 

enterprise.8164.2.2 

 

The temperature of the card is now within its safe operating range. This notification is only generated if the card has 
previously generated a starCardTempOverheat notification. 

Action to be Taken: No action required. The cause for the card overheat condition should be investigated. 

 

starSlotNum 

starCardTemperature