Cisco Cisco Packet Data Gateway (PDG)
Configuring the SaMOG Gateway
Configuring the System to Perform as a SaMOG Gateway ▀
SaMOG Administration Guide, StarOS Release 19 ▄
109
Required Information
Description
Configuring and Binding the Interfaces
SaMOG service Interface port/slot
The slot and port number to which you want to bind the SaMOG service.
GTP SaMOG interface name and
context
context
The SaMOG interface and context name that will be bound to the SaMOG interface
port/slot.
port/slot.
STa Accounting service interface
port/slot
port/slot
The slot and port number to which you want to bind the STa accounting interface.
STa Accounting service name and
context
context
The name and context name of the STa accounting interface that you want to bind to
the STa accounting port/slot.
the STa accounting port/slot.
DNS service Interface slot/port
The slot and port number that to which you want to bind the DNS service.
DNS service interface name and
context.
context.
The name and context name that you want to bind to the DNS interface slot/port.
Radius PMIP-side service interface
port/slot.
port/slot.
The slot and port number to which you want to bind the PMIP-side RADIUS interface.
Radius PMIP-side service interface
name and context.
name and context.
The name and context name of the PMIP side RADIUS interface you want to bind to
the RADIUS interface port/slot.
the RADIUS interface port/slot.
Radius SaMOG-side service interface
port/slot.
port/slot.
The slot and port number to which you want to bind the SaMOG-side RADIUS
interface.
interface.
GTPU interface port/slot.
The slot and port number to which you want to bind the GTPU-interface.
SaMOG Gateway Configuration
Step 1
Set system configuration parameters such as activating PSC2s, ports, and enabling session recovery by following the
configuration examples in the System Administration Guide.
configuration examples in the System Administration Guide.
Step 2
Create the SaMOG context by applying the example configuration in the
section.
Step 3
Configure the MRME, CGW, and SaMOG services by applying the example configuration in the
Step 4
Configure the LTE policy by applying the example configuration in the
Step 5
Create the GTPU and EGTP services by applying the example configuration in the
Step 6
Create MAG services for a PMIPv6-based S2a interface by applying the example configuration in the
Step 7
Optional. Configure the IP over GRE (IPoGRE) encapsulation for processing DHCP Layer 3 IP packets by applying the
example configuration in the
example configuration in the
Step 8
Optional. Configure the IP over VLAN (IPoVLAN) encapsulation for processing DHCP Layer 3 IP packets by applying
the example configuration in the
the example configuration in the