Cisco Cisco Packet Data Gateway (PDG)
Configuring the SaMOG Gateway
Configuring the System to Perform as a SaMOG Gateway ▀
SaMOG Administration Guide, StarOS Release 17 ▄
63
ip access-group group_name [ in | out ]
exit
call-control-profile profile_name
timeout imsi cache timer_value
subscriber multi-device
authenticate context context_name auth-method { [ eap ] [non-eap] }
end
Configuring and Binding the Interfaces
The interfaces created previously now must be bound to physical ports. Bind the system interfaces by applying the
example configuration below.
example configuration below.
config
port ethernet slot no/port no
no shutdown
bind interface gtp_samog_interface_name gtp_samog_context name
exit
port ethernet slot no/port no
bind interface interface STa_acct_interface_name STa_acct_context_name
exit
port ethernet slot no/port no
bind interfacedns_interface_name dns_context name
exit
port ethernet slot no/port no
bind interfacewlc_pmip_side_interface_name wlc_pmip_side_context_name
exit
port ethernet slot no/port no
bind interfacewlc_side_samog_interface_name wlc_side_samog_context name
port ethernet slot no/port no
bind interfacegtpu_interface_name gtpu/gtpc_context name