Cisco Cisco Packet Data Gateway (PDG)

 

 

 

Flow Id 

Hex value indicating the Flow ID. 

state 

Indicates the status of session. The possible status are: 



 

Connected 



 

Connecting 



 

Disconnecting 



 

Unknown 

Access Type 

Indicates the access type of broadcast-multicast service. Possible values are: 



 

mbms-bearer: access through MBMS bearer context 



 

mbms-ue: access through MBMS UE context 

Flow ID Type 

Indicates the Flow ID type. 

callid 

Displays the call identification number (callid). 

connect time 

Displays the time of connection starts. 

call duration 

Specifies total duration of call session in hh:mm:ss format 

idle time 

Displays the amount of time that the multicast session has been idle either in an active or dormant state. 

idle time left 

Shows the amount of idle time left before timeout. 

session time left 

How much session time is left for the specified multicast session. 

Multicast ip 
address 

The IP address of the interface in the session. 

peer address 

The IP address of the peer in the session. 

source context 

Specifies the name of a configured source context from which the session was initiated. 

destination 
context 

Specifies the name of a configured destination context through which the subscribers are provided access to 
the packet data network. 

output pkts 

Indicates the number of packets transmitted. 

output bytes 

Indicates the number of bytes transmitted. 

outputs pkts 
dropped 

Indicates the number of packets that were dropped while receiving data for this multicast session. 

pk rate to peer 
(bps) 

The peak data rate, in bits per second, obtained for data sent from the subscriber to the network during the 
last sampling period. 

pk rate to peer 
(pps) 

The peak data rate, in packets per second, obtained for data received from the network by the subscriber 
during the last sampling period.