Cisco Cisco Packet Data Gateway (PDG)

 

Displays detailed configuration and functional information for a specified interface port.  

The command output varies depending on the type of port interface configured. Three tables are provided for the 
various port interface types available: 



 

Ethernet 



 

Frame Relay (ASR 5000 only) 



 

ATM (ASR 5000 only) 

 

 

Port Type 

The configured port type. Supported Ethernet port types and data transfer rates. 

Role 

The communication role played by this port. 



 

Management Port: Port has been designated for remote management access. 



 

Service Port: Port handles subscriber traffic. 

Description 

The textual description given to the port during software configuration. If no description was configured, 
(None Set) appears in this field. 

Controlled By Card 
ASR 5000 only 

The slot number and type of the front-installed application card to which this Ethernet line card is mapped.  

Redundancy Mode 

The redundancy mode configured for this Ethernet line card port. Possible redundancy modes are: 



 

Card: No redundancy will be used. 



 

Port: Port redundancy will be used. 

Framing Mode 
ASR 5x00 only 

Ethernet 

Redundant With 

The slot number and port number of the Ethernet card that is redundant with this Ethernet line card. If a 
redundant port is not available, Not Redundant appears in this field. 

Preferred Port 
Not for VPC-DI, 
CF 

Indicates if this card will assume revertive (auto-recovery) redundancy functionality should this line card 
be brought back into service after a failure. 

Physical ifIndex 

The static identification number for the slot/port combination on this Line Card. This ID is used in SNMP 
traps sent when the link status of the Ethernet port goes up or down. 

Administrative State 

Enabled indicates that this card has been configured for use via software.