Cisco Cisco Packet Data Gateway (PDG)
show ps-network
▀ show ps-network all status
▄ Statistics and Counters Reference, StarOS Release 18
4358
show ps-network all status
Table 507. show ps-network all status Command Output Descriptions
Field
Description
PS Network name
Indicates the name of the Packet Switched (PS) network instance for which status is displayed.
Associated
SCCP-Network
SCCP-Network
Indicates the name of the Signalling Connection Control Part (SCCP) network service instance which
in associated with referecned PS network instance.
in associated with referecned PS network instance.
Associated GTPU
Service
Service
Indicates the name of the GTP-U service instance which in associated with referecned PS network
instance.
instance.
GTPU Context Name
Indicates the name of the context in which GTP-U service instance is configured.
SGSN Point Code
Indicates the address of SGSN in SS7 point code notation which is serving the referenced PS network
instance.
instance.
Status
Indicates the status of SGSN which is serving the referenced PS network instance.
Network Status
Indicates the status of network in which the referenced PS network instance is placed.
NRI
Indicates the Network Resource Identication (NRI) bit configuration status for the referenced PS
network.
network.
IDNNS
Indicates the Intra-Domain NAS Node Selector (IDNNS) configuration status for the referenced PS
network to transport the NRI value.
network to transport the NRI value.
CORE NODE MAP
Indicates the core node mapping configuration status for the referenced PS network.
Initiated Ranap Reset
Indicates if the HNB-GW Initiated RANAP Reset function is enabled or disabled.
Important:
Before StarOS 14.0 release, this counter was displayed in
show
hnbgw-service
command outputs.
Ranap Reset Ack Timer
The timer value, in seconds, that defines how long the HNB-GW waits for a RESET ACK message
from the SGSN after transmitting a RESET message. This setting is used only if the HNB-GW
Initiated RANAP Reset function is enabled.
from the SGSN after transmitting a RESET message. This setting is used only if the HNB-GW
Initiated RANAP Reset function is enabled.
Important:
Before StarOS 14.0 release, this counter was displayed in
show
hnbgw-service
command outputs.
Ranap Reset Maximum
Retransmissions
Retransmissions
Sets the maximum number of retries allowed for the HNB-GW to transmit a RANAP RESET message
to the SGSN if the RESET ACK timer expires. This setting is used only if the HNB-GW Initiated
RANAP Reset function is enabled.
to the SGSN if the RESET ACK timer expires. This setting is used only if the HNB-GW Initiated
RANAP Reset function is enabled.
Important:
Before StarOS 14.0 release, this counter was displayed in
show
hnbgw-service
command outputs.