Cisco Cisco Packet Data Gateway (PDG)
show sgw
▀ show sgw-service all
▄ Statistics and Counters Reference, StarOS Release 18
4562
show sgw-service all
Displays configuration information for all S-GW services configured on the system.
Table 565.
show sgw-service all
Command Output Descriptions
Field
Description
Service name
The name of the S-GW service.
Service-ID
The system generated identification number of the service.
Context
The context name where the service is located.
Accounting context
The context where the accounting configuration and or interfaces are configured.
Accounting mode
The accounting mode to be used for the S-GW service – GTTP (default), RADIUS/Diameter or none.
Status
The status of the service.
Egress Protocol
The egress protocol, such as “gtp-pmip”
Ingress EGTP service
The ingress eGTP service configured for this S-GW service.
Egress context
The egress context configured for this service.
Egress EGTP service
The egress eGTP service configured for this S-GW service.
Egress MAG service
The egress Mobile Access Gateway (MAG) service configured for this service.
IMS auth. service
The IMS authorization (IMSA) service used by this service for IMS subscribers.
Accounting policy
The name of the operator policy associated with accounting for this service.
Newcall policy
The newcall policy configured for this service.
QCI-QOS mapping
table
table
The QoS Class Index to QoS mapping table configured for use with this service.
GTPC Path Failure Handling
S11-Interface
local-purge: The S-GW clears the affected bearer (or PDN if the path failure is received on a default
bearer) locally without informing the peers. This is the default action for all interfaces.
signal-peer: The S-GW initiates control signalling towards the peer MME and P-GW.
bearer) locally without informing the peers. This is the default action for all interfaces.
signal-peer: The S-GW initiates control signalling towards the peer MME and P-GW.
S5-Interface
S1U-Interface
S5U-Interface
S4U-Interface
S12-Interface
GTPU Error Indication Handling
S1U-Interface
local-purge: The S-GW clears the affected bearer (or PDN if the error indication is received on the
default bearer) locally without informing the peers.
page-ue: The S-GW moves the complete UE state to S1-Idle and starts paging for this UE. This is the
default action for GTP-U error indication messages received on the S12 and S1-U interfaces.
default bearer) locally without informing the peers.
page-ue: The S-GW moves the complete UE state to S1-Idle and starts paging for this UE. This is the
default action for GTP-U error indication messages received on the S12 and S1-U interfaces.
S5U-Interface
S12-Interface