Cisco Cisco Packet Data Gateway (PDG) Folheto
ALCAP Configuration Mode Commands
maximum reset-retransmission ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1223
maximum reset-retransmission
This command sets the maximum number of retries allowed for transmission of RESET message to reset the AAL2
path.
path.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > ALCAP Service Configuration
configure > context context_name > alcap-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-alcap-service-service_name)#
Syntax
maximum reset-retransmissions retries
default maximum reset-retransmissions
default
Sets the number of RESET meesage retries to default value of 1.
retires
Sets the maximum number of retries allowed for transmission of RESET message to reset the AAL2 path by
ALCAP service.
ALCAP service.
retries
must be an integer value from 0 through 4. When 0 is used retransmission will be disabled.
Default: 1
Usage
Use this command to sets the maximum number of retries allowed for transmission of RESET message by
ALCAP service to reset the AAL2 path when Timer_RES expires. Once the maximum number of RESET
retries have been performed the ALCAP service shall stop the RESET procedure for the affected path and
path will become available for connections.
ALCAP service to reset the AAL2 path when Timer_RES expires. Once the maximum number of RESET
retries have been performed the ALCAP service shall stop the RESET procedure for the affected path and
path will become available for connections.
Example
The following command configures ALCAP service to send maximum number of
2
RESET messages after
expiry of RESET timer for AAL2 path RESET procedure:
maximum reset-retransmissions 2