Cisco Cisco Packet Data Gateway (PDG) Folheto

Página de 8487
  APN Configuration Mode Commands 
timeout idle micro-checkpoint-periodicity  ▀   
 
Cisco ASR 5x00 Command Line Interface Reference  ▄  
 
   
1395 
timeout idle micro-checkpoint-periodicity 
Enables configuration of periodic idle seconds micro checkpoint timer on a per-APN basis. 
Product
 
All 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > APN Configuration 
configure > context context_name > apn apn_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-apn)# 
Syntax
 
timeout idle idle_dur [ micro-checkpoint-periodicity time_in_seconds ] 
[ default | no ] timeout idle 
default | no
 
Indicates the timeout specified is to be returned to its default behavior. If no specific timeout is specified, then 
all are set to their default behavior. 
idle_dur
 
Designates the maximum duration of the session (in seconds). After expiry, the system considers the session 
as dormant or idle and terminates the session. 
idle_dur
 must be an integer value in the range from 0 through 4294967295. 
Default: 0 
The special value 0 disables the timeout specified. 
micro-checkpoint-periodicity time_in_seconds
 
Configures periodic idle seconds micro checkpoint timer on a per-APN basis. 
Idle seconds micro checkpoints are sent at the configured regular intervals to the standby chassis; otherwise, 
they are sent at intervals of 10 seconds, which is the default value.  
time_in_seconds
 must be an integer value in the range from 0 through 4294967295. 
Default: 10 
Important:
  Micro-checkpoint-periodicity value should be less than idle timeout value.  
Usage 
Use this command to set the idle time duration and micro-checkpoint-periodicity timer for subscriber session 
to determine the dormant session. 
Example