Cisco Cisco Packet Data Gateway (PDG) Folheto
ATM Port Configuration Mode Commands
pvc ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1495
pvc
This command creates a Permanent Virtual Connection (PVC), including the definition of the associated Virtual Path
Identifiers (VPI) and Virtual Connection Identifiers (VCI) for the PVC. By defining a PVC, this command enters into
PVC configuration mode. The ATM port supports a maximum of 256 PVC definitions.
Identifiers (VPI) and Virtual Connection Identifiers (VCI) for the PVC. By defining a PVC, this command enters into
PVC configuration mode. The ATM port supports a maximum of 256 PVC definitions.
Product
HNB-GW
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > ATM Port Configuration
configure > port atm slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-port-slot_number/port_number)#
Syntax
[ no ] pvc vpi vpi# vci vci# [ type { aal2 [ cps-payload-size cps_payload_value | aal5
}] ] [ -noconfirm ]
}] ] [ -noconfirm ]
no
Deletes the PVC’s entry from the configuration.
vpi
vpi#
VPI identifies a unique path to a destination point in the ATM portion of the network. The VPI and the VCI
combine to create the PVC between the MS and the destination point.
combine to create the PVC between the MS and the destination point.
vpi#
must be an integer, 0 to 255.
vci
vci#
VCI identifies a unique virtual circuit within the associated VPI.
vci#
must be an integer, 0 to 65535.
type
This keyword is used to define the type of PVC as AAL2 or AAL5 for HNB-GW service configuration
within the associated VPI and VCI.
within the associated VPI and VCI.
aal2
This keyword is used to define the type of PVC as AAL2 for HNB-GW service configuration within the
associated VPI and VCI.
associated VPI and VCI.
aal5
This keyword is used to define the type of PVC as AAL5 for HNB-GW service configuration within the
associated VPI and VCI.
associated VPI and VCI.