Cisco Cisco Packet Data Gateway (PDG) Folheto
Call Control Profile Configuration Mode
override-arp-with-ggsn-arp ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1905
override-arp-with-ggsn-arp
Enables or disables the ability of the SGSN to override an Allocation/Retention Priority (ARP) value with one received
from a GGSN. If there is no authorized Evolved ARP received from the GGSN, by default the SGSN continues to use
the legacy ARP included in the Quality of Service (QoS) Profile IE.
from a GGSN. If there is no authorized Evolved ARP received from the GGSN, by default the SGSN continues to use
the legacy ARP included in the Quality of Service (QoS) Profile IE.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
[ remove ] override-arp-with-ggsn-arp
remove
Adding the
remove
keyword to the command disables the override feature.
Usage
Enabling this function on the SGSN will allow the ARP sent by the GGSN, in CPCR / UPCR / UPCQ, to be
applicable as an overriding value.
applicable as an overriding value.
Example
Use this command to configure the SGSN to negotiate the ARP to be used as an overriding value:
override-arp-with-ggsn-arp