Cisco Cisco Packet Data Gateway (PDG) Folheto
Call Control Profile Configuration Mode
▀ s1-reset
▄ Cisco ASR 5x00 Command Line Interface Reference
1944
s1-reset
Configures the behavior of user equipment (UE) on S1-reset.
Product
MME
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
s1-reset { detach-ue | idle-mode-entry }
default s1-reset
default
Reset the profile configuration to the system default of
idle-mode-entry
.
detach-ue
Upon S1-reset the MME will detach the UE.
idle-mode-entry
Upon S1-reset the MME will move the UE to idle-mode. This is the default setting for this command.
Usage
Use this command to set the MME’s reactions to an S1-reset.
Example
Configure the MME to put the UE into idle-mode upon receipt of S1-reset:
s1-reset idle-mode-entry