Cisco Cisco Packet Data Gateway (PDG) Folheto
Context Configuration Mode Commands I-M
ip routing overlap-pool ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
2411
ip routing overlap-pool
Configures the routing behavior for overlap-pool addresses.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[ no | default ] ip routing overlap-pool
default
Resets the command to its default setting of disabled.
no
Disables the routing behavior for overlap-pool addresses for the current context.
Usage
Use this command configuration to advertise overlap-pool addresses in dynamic routing protocols when
overlap pools are configured using vlan-ids. If the “iprouting overlap-pool” is configured, then the overlap-
addresses are added as interface addresses and advertised.
overlap pools are configured using vlan-ids. If the “iprouting overlap-pool” is configured, then the overlap-
addresses are added as interface addresses and advertised.