Cisco Cisco Packet Data Gateway (PDG) Folheto
Context Configuration Mode Commands I-M
ipms ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
2415
ipms
Enables/disables/manages an intelligent packet monitoring system (IPMS) client service and enters the IPMS Client
Configuration Mode within the current context.
Configuration Mode within the current context.
Product
IPMS
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[ no ] ipms [ -noconfirm ]
no
Deletes a previously configured IPMS client service.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
Caution:
If this keyword option is used with
no ipms
command, the IPMS client service will be deleted with
all active/inactive IPMS sessions without prompting any warning or confirmation.
Usage
Use this command to enable/disable/manage the IPMS client service within a context and configure certain
functionality. This command enables and allows the configuration of service enabling the system to function
as an IPMS-enabled Access Gateway in a network. This command is also used to remove previously
configured IPMS client service.
A maximum of 1 IPMS client can be configured per system.
functionality. This command enables and allows the configuration of service enabling the system to function
as an IPMS-enabled Access Gateway in a network. This command is also used to remove previously
configured IPMS client service.
A maximum of 1 IPMS client can be configured per system.
Important:
The IPMS is a license enabled external application support. Refer to the IPMS Installation and
Administration Guide for more information on this product.
Refer to the IPMS Installation and Administration Guide and IPMS Configuration Mode chapter of this
reference for additional information.
reference for additional information.
Example
The following command creates an IPMS client service name within the context:
ipms