Cisco Cisco Packet Data Gateway (PDG) Folheto
Context Configuration Mode Commands N-R
radius dictionary ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
2557
radius dictionary
Configures the RADIUS dictionary.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
radius dictionary dictionary
default radius dictionary
default
Configures the default setting.
dictionary
Specifies which dictionary to use.
dictionary
must be one of the following values:
Table 22. RADIUS Dictionary Types
Dictionary
Description
3gpp
This dictionary consists of all the attributes in the standard dictionary, and all of the attributes specified in 3GPP
32.015.
32.015.
3gpp2
This dictionary consists of all the attributes in the standard dictionary, and all of the attributes specified in IS-835-
A.
A.
3gpp2-835
This dictionary consists of all the attributes in the standard dictionary, and all of the attributes specified in IS-835.
customXX
These are customized dictionaries. For information on custom dictionaries, contact your local service
representative.
representative.
XX
is the integer of the custom dictionary.
NOTE: RADIUS dictionary
custom23
should be used in conjunction with Active Charging Service (ACS).
standard
This dictionary consists only of the attributes specified in RFC 2865, RFC 2866, and RFC2869.
starent
This dictionary consists of all the attributes in the starent-vsa1 dictionary and incorporates additional VSAs by
using a two-byte VSA Type field. This dictionary is the master-set of all of the attributes in all of the dictionaries
supported by the system.
using a two-byte VSA Type field. This dictionary is the master-set of all of the attributes in all of the dictionaries
supported by the system.