Cisco Cisco Packet Data Gateway (PDG) Folheto
Exec Mode Commands (A-C)
▀ clear subscribers
▄ Cisco ASR 5x00 Command Line Interface Reference
3770
clear subscribers
Disconnects subscribers based on specified criteria.
Product
All
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
clear subscribers [ keywords ] [ verbose ] [ -noconfirm ]
The keywords are filters that modify or filter the criteria for deciding which subscriber sessions to clear and
are described below. Multiple keywords can be entered on a command line.
When multiple keywords are specified, the subscriber sessions deleted must meet the specifications of all of
the keywords.
For example; if you enter the following command:
are described below. Multiple keywords can be entered on a command line.
When multiple keywords are specified, the subscriber sessions deleted must meet the specifications of all of
the keywords.
For example; if you enter the following command:
clear subscribers ip-pool pool1 card-num 1
Only subscriber sessions that were assigned an IP address from the IP pool named
pool1
and are also being
processed by the processing card in slot
1
are cleared. All other subscriber sessions that do not meet these
criteria remain and are not cleared.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
Important:
The Operator privilege does not have access to this keyword.
active
Only disconnects subscribers who currently have active sessions.
active-charging-service ecs_service_name
Clears information for subscribers using the Active charging Service.
ecs_service_name
must be the name of the Active Charging Service, expressed as an alphanumeric string
of 1 through 15 characters.
all
Disconnects all subscribers.