Cisco Cisco Packet Data Gateway (PDG) Folheto
Global Configuration Mode Commands (A-K)
apn-profile ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
5007
apn-profile
Creates an instance of an Access Point Name (APN) profile.
Product
MME
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
[ no ] apn-profile apn_profile_name
no
Deletes the APN profile instance from the configuration.
apn_profile_name
Specifies the name of the APN profile. Enter an alphanumeric string of 1 through 64 characters.
Usage
Use this command to create an instance of an APN profile and to enter the APN profile configuration mode.
An APN profile is a template which groups a set of APN-specific commands that may be applicable to one or
more APNs. See the APN Profile Configuration Mode Commands chapter for information regarding the
definition of the rules contained within the profile and the use of the profile.
An APN profile is a template which groups a set of APN-specific commands that may be applicable to one or
more APNs. See the APN Profile Configuration Mode Commands chapter for information regarding the
definition of the rules contained within the profile and the use of the profile.
Important:
An APN profile is a key element of the Operator Policy feature and is only valid when associated
with at least one operator policy.
To see what APN profiles have already been created, return to the Exec mode and enter the
show apn-
profile all
command.
Example
The following command creates a configuration instance of an APN profile:
apn-profile apnprof27