Cisco Cisco Packet Data Gateway (PDG) Folheto
Global Configuration Mode Commands (A-K)
▀ autoconfirm
▄ Cisco ASR 5x00 Command Line Interface Reference
5010
autoconfirm
This command disables or enables confirmation for certain commands. This command affects all future CLI sessions.
Important:
To change the behavior for the current CLI session only, use the
autoconfirm
command in the
Exec Mode.
Product
All
Privilege
Security Administrator, Administrator, Operator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
autoconfirm
no autoconfirm
Usage
When autoconfirm is enabled, certain commands ask you to answer yes or no to confirm that you want to
execute the command. When autoconfirm is disabled the confirmation questions never appear. Disabling
autoconfirm disables command confirmation for all future CLI sessions.
By default
execute the command. When autoconfirm is disabled the confirmation questions never appear. Disabling
autoconfirm disables command confirmation for all future CLI sessions.
By default
autoconfirm
is enabled.
Example
The following command enables command confirmation for all future CLI sessions;
autoconfirm
The following command disables command confirmation for all future CLI sessions;
no autoconfirm