Cisco Cisco Packet Data Gateway (PDG) Folheto
GPRS Service Configuration Mode Commands
sm ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
5749
ignore-pco-decode-error
Enables the SGSN to ignore received decode errors that are due to incorrectly encoded PCO IE length in SM
Requests.
Default: disabled
Requests.
Default: disabled
modify-max-retransmissions
num_retries
Defines the maximum number of retries to transmit ‘modify PDP context request’.
num_retries
: integer from 1 to 10.
Default: 4
partial-apn-match
Enables partial matching of requested APN during APN selection.
Partial APN or APN with trailing spaces may be present in an Activate Request because incorrect information
was keyed in by the user. Though it is valid to reject such Activation Requests, it increases the signaling
between the MS and the SGSN. This has an impact on the radio resources.
Partial APN or APN with trailing spaces may be present in an Activate Request because incorrect information
was keyed in by the user. Though it is valid to reject such Activation Requests, it increases the signaling
between the MS and the SGSN. This has an impact on the radio resources.
requested-apn-from-first-subrec
Enables use of a ‘requested APN’ from the first subscription record. When this feature is enabled, the PDP
Activation is not rejected during APN Selection; instead, the APN from the first subscription record is used as
the requested APN and the SGSN continues with the rest of the APN Selection process.
A requested APN is an optional IE in an Activate PDP Request. To get the requested PDP type, if multiple
PDP subscription records exist for the subscriber, then the MS has to include the APN information to choose
the PDP subscription record during APN selection. Otherwise, such activations will be rejected during APN
selection (per TS 23.060 Appendix A). Though it is valid to reject such activation requests, it increases the
signaling between the MS and the SGSN, which impacts the radio resources.
Activation is not rejected during APN Selection; instead, the APN from the first subscription record is used as
the requested APN and the SGSN continues with the rest of the APN Selection process.
A requested APN is an optional IE in an Activate PDP Request. To get the requested PDP type, if multiple
PDP subscription records exist for the subscriber, then the MS has to include the APN information to choose
the PDP subscription record during APN selection. Otherwise, such activations will be rejected during APN
selection (per TS 23.060 Appendix A). Though it is valid to reject such activation requests, it increases the
signaling between the MS and the SGSN, which impacts the radio resources.
t3385-timeoutsecs
Defines the maximum amount of time for retransmission of ‘activate request’ messages.
secs
: Must be an integer from 1 to 60.
Default: 8
t3386-timeout secs
Defines the maximum amount of time for retransmission of ‘modify request’ messages.
secs
: Must be an integer from 1 to 60.
Default: 8 seconds.
t3395-timeout secs
Defines the maximum amount of time for retransmission of ‘deactivate request’ messages.
secs
: Must be an integer from 1 to 60.
Default: 8
trim-trailing-spaces-in-apn
Enables SGSN to strip off any trailing space(s) in requested APN.
If a requested APN in an Activate PDP Context Request has any trailing spaces, then those trailing spaces
will be removed and the length field will be updated.
If a requested APN in an Activate PDP Context Request has any trailing spaces, then those trailing spaces
will be removed and the length field will be updated.