Cisco Cisco Packet Data Gateway (PDG) Folheto

Página de 8487
  HNB-CS Network Configuration Mode Commands 
global-rnc-id  ▀   
 
Cisco ASR 5x00 Command Line Interface Reference  ▄  
 
   
6053 
global-rnc-id 
Configures the Radio Network Concentrator (RNC) identifier in a Radio Network PLMN associated with HNB-CS 
network configuration instance. The RNC identifier is provided to the HNB during HNB-REGISTRATION. 
Product
 
HNB-GW 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > HNB-CS Network Configuration 
configure > cs-network cs_instance
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-cs-network-instance_id)# 
Syntax
 
[ no ] global-rnc-id mcc mcc mcc_num mnc mnc_num id rnc_id 
no
 
Deletes the RNC, MMC, and MNC information from the HNB-CS Network configuration instance. 
mcc
 
mcc_num
 
Specifies the mobile country code (MCC) part of radio network PLMN identifier as an integer value from 
100 through 999. 
mnc
 
mnc_num
 
Specifies the mobile network code (MNC) part of radio network PLMN identifier as a 2- or 3-digit integer 
from 00 through 999. 
Usage 
Use this command to configure RNC id to associate Radio Network PLMN which will be sent to HNBs from 
HNB-GW during HNB-REGISTRATION procedure. Depending upon the requirement the RNC Identifier 
can be provided at the desired granularity. 
Example
 
The following command configures the HNB-GW service to return an RNC identifier as 
102
 when an HNB-
REGISTRATION request is received with LAC 
1
, and RAC 
2
global rnc-id mcc 102 mnc 02 id 2