Cisco Cisco Packet Data Gateway (PDG) Folheto
IPv6 ACL Configuration Mode Commands
▀ redirect css service (for uplink, by source IP address masking)
▄ Cisco ASR 5x00 Command Line Interface Reference
6420
redirect css service (for uplink, by source IP address masking)
Used to redirect subscriber sessions based on the IP address mask sent by the source in the uplink (to the Mobile Node)
direction.
direction.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IPv6 ACL Configuration
configure > context context_name > ipv6 access-list ipv6_acl_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ipv6-acl)#
Syntax
redirect css service svc_name [ log ] uplink source_address source_wildcard
after
Indicates all rule definitions subsequent to this command are to be inserted after the command identified by
the exact options listed.
This moves the insertion point to be immediately after the rule definition which matches the exact options
specified such that new rule definitions will be added, in order, after the matching rule definition.
the exact options listed.
This moves the insertion point to be immediately after the rule definition which matches the exact options
specified such that new rule definitions will be added, in order, after the matching rule definition.
before
Indicates all rule definitions subsequent to this command are to be inserted before the command identified by
the exact options listed.
This moves the insertion point to be immediately before the rule definition which matches the exact options
specified such that new rule definitions will be added, in order, before the matching rule definition.
the exact options listed.
This moves the insertion point to be immediately before the rule definition which matches the exact options
specified such that new rule definitions will be added, in order, before the matching rule definition.
no
Removes the rule definition which exactly matches the options specified.
css service svc_name
The name of the active charging service to which packets are to be redirected. At the executive mode prompt,
use the
use the
show active-charging service all
command to display the names of all configured charging
services.
svc_name
must be a string of 1 through 15 characters.
uplink
Apply this rule definition only to packets in the uplink (to the Mobile Node) direction.
log
Default: packets are not logged.
Indicates all packets which match the filter are to be logged.
Indicates all packets which match the filter are to be logged.