Cisco Cisco Packet Data Gateway (PDG) Folheto
OSPF VRF Configuration Mode Commands
▀ router-id
▄ Cisco ASR 5x00 Command Line Interface Reference
7186
router-id
Configures the router ID for the OSPF process.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > OSPF Configuration > OSPF VRF Configuration
configure > context context_name > router ospf > ip vrf vrf_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-ospf-vrf)#
Syntax
[ no ] router-id ip_address
no
Disables the router ID for the OSPF process.
ip_address
Specifies the router ID for the OSPF process in IPv4 dotted-decimal notation.
Usage
Use this command to set the router ID for the current OSPF router process.
Example
The following command sets the router ID to
192.168.200.1
:
router-id 192.168.200.1