Cisco Cisco Packet Data Gateway (PDG) Folheto

Página de 8487
  ACS Rulebase Configuration Mode Commands 
transactional-rule-matching  ▀   
 
Cisco ASR 5x00 Command Line Interface Reference  ▄  
 
   
743 
transactional-rule-matching 
This command allows you to enable or disable transactional rule matching (TRM) which allows the Enhanced Charging 
Service (ECS) to bypass per-packet rule matching on a transaction once the transaction is fully classified. 
 
Product
 
ACS 
ADC 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > ACS Configuration > Rulebase Configuration 
active-charging service service_name > rulebase rulebase_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-rule-base)# 
Syntax
 
transactional-rule-matching  
[ default | no ] transactional-rule-matching 
default
 
Configures this command with its default setting. 
Default: Disabled. 
no
 
If already configured, disables transactional rule matching. 
Usage 
Use this command to enable or disable transactional rule matching. This allows the Enhanced Charging 
Service (ECS) to bypass per-packet rule matching on a transaction once the transaction is fully classified. 
A transaction for TRM can be defined as the entire UDP flow, the ACK of the 3-way handshake to the 
FIN/RST of a TCP flow, or the HTTP request to the next HTTP request, or HTTP request to the FIN/RST for 
the final request of the flow. Rule matching can be performed on IP L4 rules (UDP, TCP), HTTP, and 
HTTPS. 
Example
 
The following command enables transactional rule matching: 
transactional-rule-matching