Cisco Cisco Packet Data Gateway (PDG) Folheto
P-GW Service Configuration Mode Commands
▀ authorize-with-hss
▄ Cisco ASR 5x00 Command Line Interface Reference
7616
authorize-with-hss
This command enables or disables subscriber session authorization via a Home Subscriber Server (HSS) over an S6b
Diameter interface. This feature is required to support the interworking of GGSN with P-GW and HA.
Diameter interface. This feature is required to support the interworking of GGSN with P-GW and HA.
Product
P-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > P-GW Service Configuration
configure > context context_name > pgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pgw-service)#
Syntax
authorize-with-hss [ egtp | lma [ s6b-aaa-group aaa-group-name | report-ipv6-addr ] |
report-ipv6-addr ]
report-ipv6-addr ]
[ default | no ] authorize-with-hss
[ default | no ]
Disables the default authorization of subscriber over S6b interface. Resets the command to the default setting
of “authorize locally” from an internal APN authorization configuration.
of “authorize locally” from an internal APN authorization configuration.
egtp
Enables S6b authorization for eGTP only.
lma
Enables S6b authorization for LMA only.
report-ipv6-addr
Enables the IPv6 address reporting through Authorization-Authentication-Request (AAR) towards the S6b
interface.
interface.
Usage
Use this command to enable/disable the authorization support for subscriber over S6b interface, which is used
between P-GW and the 3GPP AAA to exchange the information related to charging, GGSN discovery, etc.
between P-GW and the 3GPP AAA to exchange the information related to charging, GGSN discovery, etc.