Cisco Cisco Packet Data Gateway (PDG) Folheto
RoHC Profile Compression Configuration Mode Commands
total-jitter-ipv6 ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7811
total-jitter-ipv6
Specifies the total jitter allowed after compression for IPv6.
Product
HSGW
PDSN
Privilege
Administrator
Mode
Exec > Global Configuration > RoHC Profile Configuration > RoHC Profile Compression Configuration
configure > rohc-profile profile-name profile_name > compression-options
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-rohcprofile-profile_name-comp)#
Syntax
total-jitter-ipv6 time
default total-jitter-ipv6
default
Returns the command to its default value 580.
time
Specifies the total jitter interval allowed (in milliseconds) as an integer from 0 through 999999999.
Default: 580
Default: 580
Usage
Use this command to set the jitter limit after compression.
Example
The following command sets the jitter after compression limit to 900 ms:
total-jitter-ipv6 900