Cisco Cisco Packet Data Gateway (PDG) Folheto
SGSN Global Configuration Mode Commands
umts-aka-r99 ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
8025
umts-aka-r99
This command enables the operator to authenticate mobile equipment (MEs) with R99+ USIMs and capable of UMTS
AKA.
AKA.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SGSN Global Configuration
configure > sgsn-global
Entering the above command sequence results in the following prompt:
[local]host_name(config-sgsn-global)#
Syntax
umts-aka-r99
no umts-aka-r99
no
Including
no
with the command disables the authentication.
Usage
This command enables operators to authenticate MEs that are attempting to connect to a 2.5G network with
R99+ USIMs if the MEs are UMTS AKA capable. For R99 mobiles, the SGSN will continue to perform
GSM AKA even if quintuplets are received fromthe HLR.
R99+ USIMs if the MEs are UMTS AKA capable. For R99 mobiles, the SGSN will continue to perform
GSM AKA even if quintuplets are received fromthe HLR.
Example
Use the following command to disable UMTS AKA authentication for MEs with R99+ USIMs:
no umts-aka-r99