Cisco Cisco Packet Data Gateway (PDG) Folheto
SGSN Service Configuration Mode Commands
▀ sgsn-number
▄ Cisco ASR 5x00 Command Line Interface Reference
8112
sgsn-number
This command defines the E.164 number that identifies this particular SGSN service context.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > SGSN Service Configuration
configure > context context_name > sgsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgsn-service)#
Syntax
sgsn-number E.164_number
no sgsn-number
no
Removes the SGSN number configuration from the SGSN service configuration.
E.164_number
Enter a maximum of 15 digits to define the ‘phone’ number associated with this SGSN service in the
specified context.
specified context.
Usage
The SGSN supports multiple SGSN numbers – different numbers in the 2G GPRS service configuration and
the the 3G SGSN service configuration. If an HLR-initiated dialog is received, the SGSN will perform a
lookup based on the IMSI and find the correct SGSN number with which the MS is associated. Subsequent
messaging will use this address.
the the 3G SGSN service configuration. If an HLR-initiated dialog is received, the SGSN will perform a
lookup based on the IMSI and find the correct SGSN number with which the MS is associated. Subsequent
messaging will use this address.
Example
To delete the sgsn-number associated with this SGSN service context, enter:
no sgsn-number