Cisco Cisco Packet Data Gateway (PDG) Folheto
SGTP Service Configuration Mode Commands
▀ path-failure
▄ Cisco ASR 5x00 Command Line Interface Reference
8138
path-failure
This command specifies the method for determining if path failure has occurred.
Product
eWAG
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > SGTP Service Configuration
configure > context context_name > sgtp-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgtp-service)#
Syntax
path-failure detection-policy gtp { echo | non-echo } +
{ default | no } path-failure detection-policy
default
Resets the specified path failure parameter to default.
Default: echo (for both GTPC and GTPU)
Default: echo (for both GTPC and GTPU)
no
Deletes the path-failure definition from the configuration.
echo
Path failure is detected when the retries of echo messages time out.
non-echo
Path failure is detected when the retries of non-echo messages time out.
Usage
Use this command to define the policy to detect gtp path failure.
Example
Set
echo
as the polity detection type:
path-failure detection-policy gtp echo