Cisco Cisco Packet Data Gateway (PDG) Folheto
S-GW Service Configuration Mode Commands
▀ reporting-action
▄ Cisco ASR 5x00 Command Line Interface Reference
8166
reporting-action
Configures the system to start reporting session events.
Product
S-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > S-GW Service Configuration
configure > context context_name > sgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgw-service)#
Syntax
[ no ] reporting-action event-record [ trigger active-idle ]
default reporting-action event-record
default
Returns the command to its default setting of disabled.
no
Disables session event reporting.
trigger active-idle
Specifies that the event is only to be reported upon the going from active to idle.
Usage
Use this command to enable the session event reporting feature on the S-GW.
Example
The following command enables event reporting but does not limit it to events triggered by going active to
idle:
idle:
reporting-action event-record