Cisco Cisco Packet Data Gateway (PDG) Folheto
Subscriber Configuration Mode Commands
▀ ip local-address
▄ Cisco ASR 5x00 Command Line Interface Reference
8274
ip local-address
Configures the local-side IP address of the subscriber's point-to-point connection.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
ip local-address ip_address
no ip local-address
no
Removes a previously configured IP local-address.
ip_address
ip_address
Specifies an IP address configured in a destination context on the system through which a packet data
network can be accessed.
network can be accessed.
ip_address
is entered using IPv4 dotted-decimal notation.
Usage
This parameter specifies the IPv4 address on the system that the MS uses as the remote-end of the PPP
connection. If no local address is configured, the system uses an "unnumbered" scheme for local-side
addresses.
connection. If no local address is configured, the system uses an "unnumbered" scheme for local-side
addresses.
Example
The following command configures a local address of 192.168.1.23 for the MS:
local-address 192.168.1.23