Cisco Cisco Tunnel Terminating Gateway (TTG)
show mme
▀
Statistics and Counters Reference, StarOS Release 16 ▄
4551
Field
Description
Other detach procedures
The total number of Idle mode Signaling Reduction (ISR) deactivations due to an
idle timeout (implicit detach) initiated by either the MME or Peer SGSN.
idle timeout (implicit detach) initiated by either the MME or Peer SGSN.
Other reasons
The total number of Idle mode Signaling Reduction (ISR) deactivations due to a
reason not otherwise classified by one of the other ISR Deactivation Statistics
categories.
reason not otherwise classified by one of the other ISR Deactivation Statistics
categories.
show mme-service statistics tai
Note: For the MME to report these TAI level statistics, you must first issue the MME Service Configuration Mode
command:
statistics collection-mode tai
. Only those MME Services which are configured accordingly will
provide TAI based statistics.
Caution: Changing this collection mode will restart the MME service and will clear all statistics at the MME
service and eNodeB level.
Table 436.
show mme-service statistics tai
Output Descriptions
Field
Description
EMM Statistics
Attach Request: EPS
Only
Only
This sub-group displays all EMM Evolved Packet System (EPS) attach request
statistics (attempts/successes/failures) for the specified TAIs.
This is the sum of all IMSI, IMEI, local GUTI, Foreign GUTI, and P-TMSI attach
request statistics.
statistics (attempts/successes/failures) for the specified TAIs.
This is the sum of all IMSI, IMEI, local GUTI, Foreign GUTI, and P-TMSI attach
request statistics.
Attach Request:
Combined
Combined
This sub-group displays all EMM EPS combined attach statistics (attempts, successes,
EPS Only successes, and failures) for the specified TAIs.
This is the sum of all IMSI, local GUTI, Foreign GUTI, and P-TMSI attach request
statistics.
"Success EPS Only" shows when a UE has requested a Combined Attach/TAU but the
MME sent a Successful EPS-ONLY result, such as when the UE requests a Combined
Attach but the SGs interface is down and the MME sent back an Attach Accept but
with EPS-ONLY.
EPS Only successes, and failures) for the specified TAIs.
This is the sum of all IMSI, local GUTI, Foreign GUTI, and P-TMSI attach request
statistics.
"Success EPS Only" shows when a UE has requested a Combined Attach/TAU but the
MME sent a Successful EPS-ONLY result, such as when the UE requests a Combined
Attach but the SGs interface is down and the MME sent back an Attach Accept but
with EPS-ONLY.
Attach Request:
Emergency
Emergency
This sub-group displays all EMM Emergency Bearer Service attach request statistics
(attempts/successes/failures) for the specified TAIs.
(attempts/successes/failures) for the specified TAIs.
Intra MME TAU
Request
Request
This group displays all Intra-MME tracking area update statistics.