Cisco Cisco Tunnel Terminating Gateway (TTG)
Call Setup Thresholds
No Resource Call Reject Thresholds ▀
Thresholding Configuration Guide, StarOS Release 17 ▄
39
No Resource Call Reject Thresholds
No resource call reject thresholds generate alerts or alarms based on the total number of calls that were rejected by the
system due to insufficient or no resources (CPU, memory, etc.) during the specified polling interval.
system due to insufficient or no resources (CPU, memory, etc.) during the specified polling interval.
Alerts or alarms are triggered for no-resource-rejected calls based on the following rules:
Enter condition: Actual number of calls rejected due to no resources > or = High Threshold
Clear condition: Actual number of calls rejected due to no resources < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
polling interval.
Configuring No Resource Call Reject Thresholds
Use the following example for configuring no resource call reject thresholding:
configure
threshold call-reject-no-resource <high_thresh> [ clear <low_thresh> ]
threshold poll call-reject-no-resource interval <time>
threshold monitoring call-setup
end