Cisco Cisco Packet Data Gateway (PDG)

 

VLAN-related features and functions are supported across several CLI command modes. The following tables identify 
commands associated with configuration and monitoring of VLAN-related functions. 

For detailed information regarding the use of the commands listed below, see the Command Line Interface Reference. 

 

 

 

AAA Server Group 
Configuration Mode 

radius attribute nas-ip-address 
address ip_address nexthop-
forwarding-address ip_address  
vlan vlan_id

 

Sets the RADIUS client to provide the VLAN ID with the nexthop 
forwarding address to a system when running in single nexthop 
gateway mode. 
Note: To access the vlan keyword, aaa-large configuration must 
be enabled via the Global Configuration mode. 

ACS Charging 
Action 
Configuration Mode 

ip vlan vlan_id

 

Configures the VLAN identifier to be associated with the 
subscriber traffic in the destination context. 

Context 
Configuration Mode 

ip pool pool_name nexthop 
forwarding address ip_address 
overlap vlanid vlan_id

 

When a nexthop forwarding address is configured, the overlap 
vlanid keyword enables support for overlapping IP address pools 
and associates the pool with the specified VLAN ID. 

Context 
Configuration Mode 

 

Advertises overlap-pool addresses in dynamic routing protocols 
when overlap pools are configured using VLAN IDs. When 
enabled, the overlap addresses are added as interface addresses and 
advertised. 

Context 
Configuration Mode 

radius attribute nas-ip-address 
address ip_address nexthop-
forwarding-address ip_address 
vlan vlan_id

 

Specifies the VLAN ID to be associated with the next-hop IP 
address. 

Ethernet Interface 
Configuration Mode 

 

Enables or disables the collection of logical port (VLAN and NPU) 
bulk statistics for the first 32 configured Ethernet or PVC interface 
types. 

Ethernet Interface 
Configuration Mode 

vlan-map next-hop ipv4_address

 

Sets a single next-hop IP address so that multiple VLANs can use a 
single next-hop gateway. The vlan-map is associated with a 
specific interface. 

Ethernet Port 
Configuration Mode 

vlan vlan_id

 

Enters VLAN Configuration mode. 

PVC Configuration 
Mode 

 

Enables or disables traffic over a specified VLAN. See below. 

Subscriber 
Configuration Mode 

ip vlan vlan_id

 

Configures the subscriber VLAN ID that is used with the assigned 
address for the subscriber session to receive packets. If the IP pool 
from which the address is assigned is configured with a VLAN ID, 
this subscriber configured VLAN ID overrides it. 

VLAN 
Configuration Mode 

bind interface interface_name 
context_name

 

Binds a virtual interface and context to support VLAN service.