Cisco Cisco Packet Data Gateway (PDG)
Configuring the Evolved Packet Data Gateway
▀ Configuring the System to Perform as an Evolved Packet Data Gateway
▄ ePDG Administration Guide, StarOS Release 17
90
vlan <tag>
bind interface <swu_interface_name> <epdg_context_name>
exit
port ethernet <slot_number/port_number>
no shutdown
vlan <tag>
bind interface <epdg_dns_interface_name> <epdg_context_name>
exit
port ethernet <slot_number/port_number>
no shutdown
vlan <tag>
bind interface <swm_interface_name> <epdg_context_name>
exit
port ethernet <slot_number/port_number>
no shutdown
vlan <tag>
bind interface <s2b_interface_name> <egress_context_name>
exit
end
The
mag-service
command creates the MAG (Mobile Access Gateway) service that communicates with the LMA
(Local Mobility Anchor) service on the P-GW to provide network-based mobility management. The
ipv6 route
command configures a static IPv6 route to the next-hop router. In this configuration, it configures a static route from the
ePDG to the P-GW over the S2b interface. The
ePDG to the P-GW over the S2b interface. The
bind interface
command binds each logical interface to a physical
Ethernet port.
Egress Context and EGTP Service Configuration