Cisco Cisco Packet Data Gateway (PDG) Guia Do Administrador
Cisco ASR 5500 System Administration Guide ▄
331
Appendix B
ASR 5500 SDR CLI Command Strings
ASR 5500 SDR CLI Command Strings
This appendix identifies the CLI command strings that can be entered for a record section via the support record
section command in the Global Configuration Mode. The string must be entered within double quotation marks (“ “) to
be recognized. The table below also indicates default and non-default strings.
section command in the Global Configuration Mode. The string must be entered within double quotation marks (“ “) to
be recognized. The table below also indicates default and non-default strings.
For detailed command string information, refer to the Command Line Interface Reference or the online Help for the
command.
command.
The table below also indicates default and non-default strings. It reflects the output sequence of the show support
collection definitions command.
collection definitions command.
Table 39. ASR 5500 SDR CLI Command Strings
No.
Default SDR
Command String
0
Enabled
“show version verbose”
1
Enabled
“show clock”
2
Enabled
“show clock universal”
3
Enabled
“show configuration”
4
Enabled
“show_profile”
5
Enabled
“show context”
6
Enabled
“show boot”
7
Enabled
“show boot initial-config”
8
Enabled
“show system uptime”
9
Disabled
“show license information”
10
Disabled
“show license history”
11
Disabled
“show hardware inventory”
12
Disabled
“show hardware version”
13
Disabled
“show card hardware”
14
Disabled
“show card dhaccel hardware counters”
15
Enabled
“show hd raid verbose”
16
Enabled
“debug hdctrl mdstat”
17
Enabled
“debug hdctrl history”
18
Disabled
“debug hdctrl lssas”
19
Disabled
“debug hdctrl mapping”
20
Enabled
“show hd iocnt all”