Cisco Cisco Packet Data Gateway (PDG) Nota De Lançamento
HNB-GW Changes in Release 15.0
HNB-GW Enhancements for September 30, 2013 ▀
Cisco ASR 5x00 Release Change Reference ▄
241
Modified HNB-GW Features
This section identifies HNB-GW features modified in release 15.0.
Femto to Femto Handoff
Bulkstat variables have been added for Closed, Hybrid, and Open schemas for hnbgw-rua in order to the enhancement
to add establishment cause under Connect Tx
to add establishment cause under Connect Tx
Previous Behavior: Prior to release 15.0, Only RUA Connect Tx was populated when HNB-GW initiated RUA
Connect towards HNB after receiving RANAP Relocation Request from Core-Node. HNB-GW did not display the
RUA Connection-cause whether the RUA Connect TX cause was for a normal Call or for an Emergency Call.
Connect towards HNB after receiving RANAP Relocation Request from Core-Node. HNB-GW did not display the
RUA Connection-cause whether the RUA Connect TX cause was for a normal Call or for an Emergency Call.
New Behavior: Release 15.0 onwards, HNB-GW displays the RUA Connection-cause whether the RUA Connect TX
cause is for a normal Call or for an Emergency Call.
cause is for a normal Call or for an Emergency Call.
HNB-GW Command Changes as of September 30, 2013
This section provides information on HNB-GW command changes in release 15.0.
Important:
For more information regarding commands in this section, refer to the Command Line Interface
Reference for this release.
New HNB-GW Commands
This section identifies new HNB-GW commands available in release 15.0.
paging cs-domain
The
paging cs-domain
command, with multiple keywords, has been added to define paging for the CS domain
configuration in the HNB-GW service instance.
configure
context ctx_name
hnbgw-service hnb_svc_name
[ no ] paging cs-domain { fan-out timeout timeout_val1 | handle-unknown-imsi
use-cn-paging-area | page-last-known-hnb timeout timeout_val2 }
use-cn-paging-area | page-last-known-hnb timeout timeout_val2 }
default paging cs-domain { fan-out timeout | handle-unknown-imsi use-cn-paging-
area | page-last-known-hnb timeout }
area | page-last-known-hnb timeout }
end
Notes:
hnb_svc_name
is a a previously defined HNB-GW service in the Context Configuration mode.
timeout_val1
sets the timeout value in seconds for the Fan-out paging configuration. It is an integer value
ranging from 1 to 30. Default timeout value for CS domain is 5 seconds.