Cisco Cisco Packet Data Gateway (PDG) Nota De Lançamento
HSGW Changes in Release 15.0
HSGW Enhancements for June 6, 2014 ▀
Cisco ASR 5x00 Release Change Reference ▄
249
HSGW Enhancements for June 6, 2014
CSCun42462 - HSGW CLI to allow 0 value for retries to Primary PGW
Feature Changes
HSGW CLI to allow 0 value for retries to the primary P-GW
Previous Behavior: Previously, the minimum number that could be configured for max-retransmissions to the primary
P-GW (LMA - Local Mobility Anchor) was 1. With this value set at the minimum (1), the customer’s HSGW (MAG -
Mobility Access Gateway) was forced to retry to the primary P-GW (LMA) a minimum of one more time before
sending the PBU to a Secondary PGW (LMA).
P-GW (LMA - Local Mobility Anchor) was 1. With this value set at the minimum (1), the customer’s HSGW (MAG -
Mobility Access Gateway) was forced to retry to the primary P-GW (LMA) a minimum of one more time before
sending the PBU to a Secondary PGW (LMA).
New Behavior: Changed the CLI for the max-retransmissions num value to 0 so that the Secondary PGW (LMA) is
tried after the initial Primary P-GW (LMA) PBA is not received.
tried after the initial Primary P-GW (LMA) PBA is not received.
Command Changes
max-retransmissions
The CLI max-retransmissions num value has been changed from 0 from 1 so that the Secondary PGW (LMA) will be
tried after the initial Primary PGW (LMA) PBA is not received.
tried after the initial Primary PGW (LMA) PBA is not received.
configure
context context_name
mag-service hsgw_svc_name
max-retransmissions numcount
end
Notes:
max-retransmissions
: The maximum number of retransmissions of Proxy MIP control messages to the LMA.
count
must be an integer from 0 through 4294967295.
CSCuo16661 - IUBE Support on HSGW
Feature Changes
Inter-User Support in HSGW