Cisco Cisco Packet Data Gateway (PDG) Nota De Lançamento
PDSN Changes in Release 15.0
PDSN Enhancements for February 27, 2015 ▀
Cisco ASR 5x00 Release Change Reference ▄
369
CSCus51341 - [L2TP] ICRQ to include IMSI based on config CLI
Feature Changes
ICRQ message for L2TP session has calling-number to be derived from IMSI.
Adding a LAC service level CLI to configure so that IMSI has the higher priority than MSISDN/MDN.
Previous Behavior: MSISDN/MDN is used for calling-number. It has higher priority than IMSI which results in the
authentication failure on LNS that uses IMS for authentication.
authentication failure on LNS that uses IMS for authentication.
New Behavior: On configuring the CLI, it will ensure that IMSI is used as calling number in ICRQ.
Customer Impact:
Command Changes
allow
With this release, the
calling-number
keyword has been introduced to ensure that IMSI is used as calling number in
ICRQ always.
configure
context context_name
lac-service lac_service_name
allow calling-number value imsi
no allow calling-number
end
Important:
This is a customer specific feature.
Notes:
If this CLI is not configured, then MSISDN/MDN will be used as calling number.