Cisco Cisco Packet Data Gateway (PDG) Nota De Lançamento

Página de 678
SGSN Changes in Release 15.0   
▀  SGSN Enhancements for September 30, 2013 
 
 
▄  Cisco ASR 5x00 Release Change Reference 
524 
   
      end 
network-initiated-pdp-activation
 
The 
secondary
 keyword has been added to the 
network-initiated-pdp-activation
 command in the Call 
Control Profile mode. The 
secondary
 keyword specifies that only network-initiated secondary PDP context activations 
(NRSPCAs) are to be allowed.  
config 
   call-control-profile <profile_name> 
      network-initiated-pdp-activation allow secondary access-type 
      end 
peer-server
 
The following command sets up a peer-server instance in the SS7RD configuration: 
config 
   ss7-routing-domain <rd_id> variant <variant_type> 
      peer-server id <srvr_id> 
      end  
Notes: 
 
peer-server id srvr_id 
 identifies the instance is a peer-server configuration in the SS7 routing domain. 
The valid Id range has increased from 1-144 to 1-256.  
psp
 
The following command sets up a Peer Server Process (PSP) instance in the SS7RD configuration: 
config 
   ss7-routing-domain <rd_id> variant <variant_type> 
      peer-server id <srvr_id> 
         psp instance <psp_inst> 
         end  
Notes: 
 
psp instance <psp_inst> 
 identifies a PSP instance in the SS7RD configuration. The valid instance range 
has increased from 1-4 to 1-12.  
ranap paging-cause-ie mme-signalling
 
The command 
ranap paging-cause-ie mme-signalling < paging_cause_value >
 is used to set the Paging 
Cause IE value for paging from MME due to Circuit Switch Fallback (CSFB).