Cisco Cisco Aironet 350 Wireless LAN Client Adapter Guia De Resolução De Problemas

Página de 13
Installing Windows 95 Drivers and Utilities for the
Cisco Aironet 340/350 Series Client Adapters
Document ID: 12134
You need a valid Cisco.com account in order to download Cisco Aironet
drivers, firmware, and utilities. If you do not have a Cisco.com account,
register for free at the Cisco.com Registration page.
Contents
Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Install the Hardware
      Installing a PC Card
      Install a PCI Client Adapter
 Install Drivers and Utilities
      Install the Drivers
      Install the Utilities
      Verify the Installation
 Related Information
Introduction
This document is a guide to installing Windows 95 drivers and utilities for the Cisco Aironet 340 and 350
Series Client Adapters.
Note: The installation methods described here are similar to those used for Windows 98, Windows NT, and
Windows 2000. There are, however, some key differences. Refer to Installing the Driver for Windows 98,
Installing the Driver for Windows NT, or Installing Windows 2000 Drivers and Utilities for more information.
Prerequisites
Requirements
You need these items to complete this installation:
A Cisco Aironet 340 or 350 series client adapter card.
• 
The Windows 95 drivers and utilities, which can be found on the CD−ROM that accompanied the
client adapter card or you can download it from the Wireless Download Center (registered customers
only) .
• 
Components Used
The information in this document is based on these software and hardware versions:
Toshiba Tecra8000 laptop computer running Microsoft Windows 95 Version B
•