Cisco Cisco Aironet 350 Wireless LAN Client Adapter
14
Release Notes for Cisco Aironet Site Survey Utility 1.3.01
OL-8497-01
Using the AP Scan List Tab
Data Encryption
Indicates whether the data exchanged with this access point is encrypted.
Value:
Secure or Open
Value
Description
Secure
The data exchanged with this access point is encrypted.
Open
The data exchanged with this access point is unencrypted.
Type
The IEEE 802.11 standard that describes the access point’s radio band.
Value:
A, B, or G
Channel (Frequency)
The channel and radio frequency (in MHz) that the access point is currently
using for communications.
using for communications.
Value:
Dependent on radio band and regulatory domain
Max Rate
The maximum rate at which the client adapter can transfer data with an access
point. The supported rates of both the client adapter and the access point are
examined, and the highest rate that they have in common is the one that is
used.
point. The supported rates of both the client adapter and the access point are
examined, and the highest rate that they have in common is the one that is
used.
AP Name
The access point’s name. It is shown only if the access point was configured
with a name, Aironet Extensions are enabled (on access points running Cisco
IOS Release 12.2(4)JA or later), and the access point transmits this
information.
with a name, Aironet Extensions are enabled (on access points running Cisco
IOS Release 12.2(4)JA or later), and the access point transmits this
information.
Note
This field shows up to 15 characters although the name of the access
point may be longer.
point may be longer.
Load
The access point’s channel utilization in terms of traffic and throughput.
Value:
0 to 100%
Note
This parameter is shown only if the access point is using QoS Basis
Service Set (QBSS) or call admission control (CAC). If neither is
used, this field is left blank. If both are used, the value comes from the
QBSS.
Service Set (QBSS) or call admission control (CAC). If neither is
used, this field is left blank. If both are used, the value comes from the
QBSS.
CCX
The version of Cisco Compatible Extensions (CCX) supported by the access
point. It is shown only if the access point transmits this information.
point. It is shown only if the access point transmits this information.
Value:
1, 2, 3, or 4
Table 2
Site Survey Utility - AP Scan List (continued)
AP Scan List Parameter Description