Cisco Cisco Aironet 350 Wireless LAN Client Adapter

To enable the site survey utility to automatically copy the contents of the AP scan list to a log file under 
the conditions specified above, choose Enable AP Scan Logging from the AP Scanning drop-down 
menu or press F9. When AP scan logging is enabled, a check mark appears next to the Enable AP Scan 
Logging menu option, and APS appears in the site survey utility’s status bar.

When AP scan logging is enabled, log entries are made even when the AP Scan List tab is not visible 
and when it is visible with updates paused.

To disable AP scan logging, choose the Enable AP Scan Logging menu option again so that the check 
mark disappears or re-press F9.

Follow these steps to view the AP scan log file from within the site survey utility.

You can also open the AP scan log file from Windows Explorer.

Choose View AP Scan Log from the AP Scanning drop-down menu. The log file opens in the configured 
viewer (see 

The View AP Scan Log menu option is disabled if the log file does not exist.

 shows the AP scan log file in Notepad, but other viewers can be used.