Cisco Cisco Aironet 350 Wireless LAN Client Adapter

If the authentication attempt is successful, no action is required. During the authentication attempt, you 
can click Retry and reenter your username and/ or password. If you do this, the OK button is activated. 
Click OK to retry the authentication.

The Retry button is only enabled while the authentication attempt is in progress.

Your client adapter authenticates to the RADIUS server by using your username and password and receives 
a session-based WEP key.

You can install the driver and client utilities from the Cisco Aironet Wireless LAN Client Adapters 
Drivers and Utilities CD or at Cisco.com.

This procedure can be performed only by root users (those with administrative rights).

Cisco’s Linux driver supports up to and including version 2.4.20-28 of the Linux kernel. To determine 
your kernel version, type uname -a and press Enter. The name of your computer and the Linux kernel 
version are displayed. For example, in Linux montecito 2.2.16-22#1 Wed Aug 8 164906 EDDT 2001 i686 
unknown, montecito represents your computer’s name, and 2.2.16-22 is the kernel version.

If you are using a PCMCIA client adapter, do not insert it into the computer’s PCMCIA slot until the 
driver has been loaded; otherwise, the computer could hang. The procedure indicates when the client 
adapter should be inserted.

If you are using a PCI client adapter, you can install it before you load the drivers.