Cisco Cisco Aironet 350 Wireless LAN Client Adapter

The following caveats have been resolved:

CSCee01164—ACAT v1.3 distribution is missing the InstallData.txt file.

ACAT version 1.3 does not contain the InstallData.txt file. When you activate ACAT, an error occurs 
indicating the the InstallData.txt file cannot be located.

CSCee18819—Security setting does not allow static WEP with open authentication

ACAT version 1.3 does not allow a combination of static WEP and open authentication to be 
selected when creating profiles for the CB20A client adapters.

CSCin53301—Some content is partially seen on the RF Settings and Security pages.

The Defaults button does not uncheck the Allow association to both WPA and non-WPA 
Authentications option check box.

CSCin70388—Boundry value for RTS fields are not clearly displayed.

In ACAT version 1.3, the maximum and minimun values for the RTS Threshold and RTS Retty Limit 
parameters on the Profile Settings > Infrastructure tab are not clearly displayed when the values are 
set using the slide bar.

For the most up-to-date, detailed troubleshooting information, refer to the Cisco Technical Support 
website at the following URL:

Click Product Support under Documentation and Tools, and then click Wireless on the left side of the 
screen.

For more information about wireless LAN adapters and related products, refer to the following 
documents:

Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration 
Guide for Windows provides instructions for using the Install Wizard to install and configure the 
wireless client adapter, the firmware, the driver, and the utilities.

Cisco Aironet Access Point Software Configuration Guide provides configuration information for 
340 and 350 series access points.

Cisco IOS Software Configuration Guide for Access Points provides software configuration 
information for access points running Cisco IOS software.