Cisco Cisco Aironet 350 Wireless LAN Client Adapter
5
Release Notes for Cisco Aironet Client Utilities 2.60 and Driver 2.60 for Windows CE
OL-6552-01
New and Changed Information
Fields Added to Status Window
The following fields have been added to the ACU Status window:
•
Associated Access Point MAC Address—The MAC address of the access point to which your
client adapter is associated. It is shown only if the client adapter is in infrastructure mode.
client adapter is associated. It is shown only if the client adapter is in infrastructure mode.
Note
This field displays the MAC address of the access point’s Ethernet port (for access points
that do not run Cisco IOS) or the MAC address of the access point’s radio (for access points
that run Cisco IOS). The MAC address of the Ethernet port on access points that run Cisco
IOS is printed on a label on the back of the device.
that do not run Cisco IOS) or the MAC address of the access point’s radio (for access points
that run Cisco IOS). The MAC address of the Ethernet port on access points that run Cisco
IOS is printed on a label on the back of the device.
•
Associated Access Point IP Address—The IP address of the access point to which your client
adapter is associated. It is shown only if the client adapter is in infrastructure mode, the access point
was configured with an IP address, and Aironet Extensions are enabled (on access points running
Cisco IOS Release 12.2(4)JA or later).
adapter is associated. It is shown only if the client adapter is in infrastructure mode, the access point
was configured with an IP address, and Aironet Extensions are enabled (on access points running
Cisco IOS Release 12.2(4)JA or later).
Note
If Aironet Extensions are disabled, the IP address of the associated access point is shown as
0.0.0.0.
0.0.0.0.
•
Transmit Power—The power level at which your client adapter is currently transmitting. The
maximum level is dependent upon your country’s regulatory agency.
maximum level is dependent upon your country’s regulatory agency.
Value: 1, 5, 20, 30, 50, or 100 mW
•
Link Speed—The rate at which your client adapter is currently transmitting data packets.
Value: 1, 2, 5.5, or 11 Mbps
•
Channel Set—The regulatory domain for which your client adapter is currently configured, such as
North America. This value is not user selectable.
North America. This value is not user selectable.
•
MAC Address—The MAC address assigned to your client adapter at the factory.
•
Encryption—Indicates the type of encryption that is being used for data packets.
In addition, the following values are now available for the Message Integrity Check (MIC) field:
Encryption Value
Description
None
Data encryption is disabled.
WEP
Static or dynamic WEP is enabled, but neither MMH MIC nor WPA is
enabled.
enabled.
Cisco TKIP
MMH MIC is enabled.
WPA TKIP
WPA is enabled.
MIC Value
Description
None
MIC is disabled.
MMH
MIC is enabled and is being used with Cisco TKIP.
Michael
MIC is enabled and is being used with WPA TKIP.