Cisco Cisco Aironet 350 Wireless LAN Client Adapter

When you are finished making selections, click Next.

The installation process begins, and you are notified as each component is installed. Perform one of the 
following:

If the following message appears, click OK and then either insert your client adapter or reboot your 
computer: “The installation will complete and applications will be installed when a wireless LAN 
client adapter is inserted. If an adapter is already inserted, remove and reinsert the adapter or reboot 
the machine.”

The Found New Hardware screen appears. Depending on your computer’s operating system, you 
may have to click Next. The driver and other software components are installed. Then an ACM icon 
appears in the Windows system tray (unless you changed the default value during installation). 
Perform one of the following:

If a message appears asking if you wish to reboot now, click Yes.

To ensure that your client adapter software is installed properly, Cisco recommends that 
you click Yes to reboot your computer now.

If a message appears indicating that the system is about to reboot, click OK and allow your 
computer to restart.

If a message appears asking if you wish to reboot now, click Yes.

To ensure that your client adapter software is installed properly, Cisco recommends that you 
click Yes to reboot your computer now.

If a message appears indicating that the system is about to reboot, click OK and allow your computer 
to restart.

PEAP

Installs the PEAP supplicant version included in the Install Wizard 
file. Installing the PEAP supplicant enables the client to support 
PEAP authentication. If this option is not selected now and you later 
want to use PEAP, you must run this installation program again and 
select this option.

Default: Unchecked

To enable Cisco PEAP authentication, your computer must 
run Windows 2000 with the Microsoft 802.1X supplicant 
installed or Windows XP.

Service Pack 1 for Windows XP and the Microsoft 802.1X 
supplicant for Windows 2000 include Microsoft’s PEAP 
supplicant, which supports a Windows username and 
password only and does not interoperate with Cisco’s PEAP 
supplicant. To use Cisco’s PEAP supplicant, install the Install 
Wizard file after Service Pack 1 for Windows XP or the 
Microsoft 802.1X supplicant for Windows 2000. Otherwise, 
Cisco’s PEAP supplicant is overwritten by Microsoft’s PEAP 
supplicant.