Cisco Cisco Aironet 350 Wireless LAN Client Adapter
2
Release Notes for Cisco Aironet Client Utilities (Version 2.30) and Drivers (Version 2.30) for Windows CE
OL-3962-01
System Requirements
System Requirements
You need the following in order to install client utility and driver release 2.30 for Windows CE:
•
One of the following Windows CE devices equipped with a Type II or Type III PC card slot:
–
Pocket PC (PPC) running Windows CE 3.0 with an ARM, StrongARM, MIPS, SH3, or X86
processor
processor
–
Handheld PC (HPC) running Windows CE 3.0 with an ARM, StrongARM, MIPS, SH4, or X86
processor
processor
–
A computing device running Windows CE .NET 4.0 or 4.1 with an ARM, StrongARM, or X86
processor
processor
Note
ViewSonic devices running Windows CE .NET are not supported.
Note
All drivers and supporting software (Card and Socket Services) for the PC card slot must be
loaded and configured.
loaded and configured.
•
Client adapter firmware version 5.02.19 or greater (recommended)
•
Laptop or PC running a Windows operating system and ActiveSync
•
Serial or USB connection from the laptop or PC to the Windows CE device
•
PPC 2002 device, if your wireless network uses EAP-TLS or PEAP authentication
•
Certificate Authority (CA) and user certificates for EAP-TLS authentication or CA certificate for
PEAP authentication
PEAP authentication
•
If your wireless network uses PEAP authentication with a One-Time Password (OTP) user database:
–
The hardware token from an OTP vendor
–
Your hardware token password
•
Access points to which your client adapter may attempt to authenticate must use the following
firmware versions or greater: 11.23T (340 and 350 series access points), 12.2(4)JA (1100 series
access points), or 11.54T (1200 series access points).
firmware versions or greater: 11.23T (340 and 350 series access points), 12.2(4)JA (1100 series
access points), or 11.54T (1200 series access points).
•
All necessary infrastructure devices (such as access points, servers, gateways, user databases, etc.)
must be properly configured for the authentication type you plan to enable on the client.
must be properly configured for the authentication type you plan to enable on the client.
Important Notes
Recommended Firmware Version
Client adapter firmware version 5.02.19 or greater is recommended for use with client utility and driver
version 2.30 for Windows CE. If your client adapter is using a previous firmware version, follow the
instructions in the Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for
Windows CE to upgrade the firmware after installing client utility and driver release 2.30.
version 2.30 for Windows CE. If your client adapter is using a previous firmware version, follow the
instructions in the Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for
Windows CE to upgrade the firmware after installing client utility and driver release 2.30.