Cisco Cisco Aironet 350 Wireless LAN Client Adapter

When using release 3.0, you might encounter a conflict with third-party supplicants (such as the 
Meetinghouse Aegis or the Juniper Odyssey) that causes the Cisco client adapter to lose connection. If 
you encounter such a conflict, disable third-party supplicants.

ACAU 3.0 is compatible with only the Cisco Aironet CB21AG and PI21AG client adapters. 

You can change the name of the ACAU configuration file; however, the name must be changed back to 
CiscoAdminConfig.dat before the user runs the Install Wizard. Otherwise, the Install Wizard does not 
load the configuration file.

You must also save the configuration file to the drive and directory in which the Install Wizard resides. 
If you save the file to any other location, it is not processed by the Install Wizard.

To ensure proper operation, the Novell Client (if used) must be installed on the user’s computer prior to 
the client adapter software.

If you created a Host Based EAP profile using ACAU 1.2 or 1.3 and import it for use with ACAU 2.5, it 
is designated as an EAP-FAST profile in ACAU 2.5. To change it, you must manually reconfigure the 
profile for Host Based EAP. 

This section describes the new and modified features in version 3.0 of ACAU.

The following is a list of EAP-FAST enhancements, which are accessible through the ACAU user 
interface:

Support of additional EAP authentication methods

Version 3.0 of ACAU supports three EAP methods in both the PAC auto provisioning phase and the 
EAP-FAST authentication phase. These methods are: 

EAP-MSCHAPv2

EAP-GTC